Brass Fixed Length Spreader Bars for BDSM use.
For something slight different and can give that old time dungeon feel.

These Spreader Bars are made out of Brass parts. They are not quite as strong as my stainless steel ones, however I believe they will be strong enough for reasonable use.

I only have the two sizes available for this listing, 24 inches and one 18". If you want the 18" please ask in note, first come first served.

I can make other sizes via a custom order. At this time up to 24", they will be the same charge as the 24".
The reason they will be the same price as the 24" size is the tube is actually not the expensive part, the pair of end caps that are brass and fit the tube are. The shackles also cost me more than the stainless steel ones do, mostly a matter of availability I suspect.
Longer than 24" will require a custom order and I will have to order the parts in and likely have to charge more.

NOTE: I do not have nor can I get Brass parts to add additional attachment points to the brass spreader bars.

Example pictures in use are for the Stainless Steel version listed elsewhere.

SAFETY NOTE:
None of the brass components have a listed load rating for rigging.
I do not have the testing equipment to properly test their use to determine a rating in this configuration or use.
However, I did some personal testing and they seemed to hold up.

CUSTOMIZATION:
As shown in the pictures an option with built in cuffs is available, however, due to all the size variations, a set with the built in cuffs is a custom order, so please message me if interested. Also the brass connectors will have an extra piece of leather inserted because of the curve of the available connector if you want the connector in Brass.

The Cuff set (either wrist or ankle) adds $75 and will substitute for the shackles, if you would like to be able to swap the shackles with the cuffs a pair of the shackles added on as an option with the cuffs would be $15.

I will need wrist or ankle cuff size to make the cuff order. I can not make cuffs that will fit both and still look nice, but the cuffs can be swapped out. If you want both Wrist and Ankle sets I will likely only charge $135 for both sets to make them at the same time.
Any of the regular leathers I have are available for cuff sets
If ordering the cuff sets, those will be removable as default.

I can also get the tubes in other colors including Bronze, Copper, oil-rubber Bronze and a powder coated finish, although the end caps and shackles are limited to Stainless Steel or Brass at this time. Any of these will require about 2 weeks to get the parts in. Or at least I think I still can.

Normally, All of my fixed length spreader bars are cut to length after payment and the number available at any one time is set by the number of end caps and shackles I keep on hand. Basically if you want more than 4 of the bars, please contact me first. These are already pre-cut to make a 24" size spreader bar.

The mirror finish will scuff over time, however, the personal set of Stainless Steel I use the most is still shiny enough for photographs after well over 12 years as of this date. I am not sure how long the brass will hold up at this time.

SHIPPING:
Shipping costs are worst case estimates, I may refund the portion of shipping not needed if the cost of shipping of these items is less than requested by at least $2.50 .
The spreader bars will be shipped in long boxes or tubes depending on order or availability wrapped in bubble or foam wrap.
If ordering a Cuff Set, the cuffs may (or may not) be detached for shipment, however they only need a Phillips head screwdriver to attach.

Background Trivia:
In the case of the brass ones a customer asked if I could make them, I checked and found I could get the parts, but only from one source for the end caps at anything approaching a reasonable price. After setting the price, the customer paid and I ordered enough to make two sets, in case something went wrong with the first attempt. It worked and I offered the spare to see if others wanted one. The second sold faster than expected, so I have ordered some more parts to continue seeing what the demand is for them. They are priced as low as I can go at this time.