Hurry! Only 2 left in stock!
This listing is for the somewhat Unique medical grade material silicone Balls for Ball Gags that I make.
They are JUST THE BALLS, NO straps.
They are what I would call "Pumpkin Orange" in color. They are a mix of yellow and red colorants, because the yellow has some white in it, they have a very slight white shade from what would be straight on Orange.
This is a manual hand mix, so there will be slight variations between batches.
I DO NOT plan to ever get orange colored leather, don't even know if it is available.
I have decided based on this last round that I will keep the sizes 1.0" to 2.5" in stock, sort of, as in I will only be maintaining a small amount of these in stock at any one time, so may run out from time to time of particular sizes.
I do not have room for storing a full stock set of these. I may in the next batch make one or two of the very large balls, but likely will b ...
They are JUST THE BALLS, NO straps.
They are what I would call "Pumpkin Orange" in color. They are a mix of yellow and red colorants, because the yellow has some white in it, they have a very slight white shade from what would be straight on Orange.
This is a manual hand mix, so there will be slight variations between batches.
I DO NOT plan to ever get orange colored leather, don't even know if it is available.
I have decided based on this last round that I will keep the sizes 1.0" to 2.5" in stock, sort of, as in I will only be maintaining a small amount of these in stock at any one time, so may run out from time to time of particular sizes.
I do not have room for storing a full stock set of these. I may in the next batch make one or two of the very large balls, but likely will b ...
This listing is for the somewhat Unique medical grade material silicone Balls for Ball Gags that I make.
They are JUST THE BALLS, NO straps.
They are what I would call "Pumpkin Orange" in color. They are a mix of yellow and red colorants, because the yellow has some white in it, they have a very slight white shade from what would be straight on Orange.
This is a manual hand mix, so there will be slight variations between batches.
I DO NOT plan to ever get orange colored leather, don't even know if it is available.
I have decided based on this last round that I will keep the sizes 1.0" to 2.5" in stock, sort of, as in I will only be maintaining a small amount of these in stock at any one time, so may run out from time to time of particular sizes.
I do not have room for storing a full stock set of these. I may in the next batch make one or two of the very large balls, but likely will be summer 2025 before I do that. Possibly sooner though.
They are being sold for the folks that want a high quality ball that are a little unique.
The balls are made in Newport News, Virginia, USA.
They are only available in the sizes created.
They have been calipered and rounded off to my usual sizes and are thus give or take 1/16th of an inch variation from that listed.
STRAPS:
The following two links go to SOME of my replacement Straps, be sure to get the correct width of strap. Request in notes if unsure and you get the strap at the same time.
Other leather strap colors are available as shown in images. Feel free to send me a message if interested in other colors.
The links will be changed to a Spicerack link later, but should still work on Etsy.
Regular Black Leather:
https://www.etsy.com/listing/579102658/replacement-black-leather-straps-for
Black PVC Rubber Straps:
https://www.etsy.com/listing/553566193/pvc-rubber-replacement-strap-for-ball
Let me know in the notes if you want the ball placed on the strap before shipping, otherwise they will be shipped in separate packaging. (until the Strap listings are moved here, they will be shipped separately.
Specifications:
- USP Class VI quality level of silicone material and most color additives (although they do not come sterilized, they can be medically sterilized if needed or desired).
- I am not 100% sure that mixing the colors has affected their properties, however both colors used pass individually.
- Target durometer in this case is 43. The durometer should be plus or minus 5 due to molding variations. A small number of the smaller balls are a target of 34.
- The strap holes are molded in and can not be changed without modifications to the mold.
- Rectangular Strap holes.
-- Balls that are 1.0, 1.125", 1.25" and 1.375" in diameter have a 1/2" by 1/8" strap hole.
-- balls that are 1.5" to 2.5" in diameter have a 3/4 inch by 1/8 inch strap hole.
-- Balls at or larger than 2.625" in diameter have a 1" by 1/8" strap hole.
Note: the holes are a hint bigger than this to accommodate a strap exactly this width and thickness.
TRIVIA NOTES:
I had several customer requesting Orange and so I decided to give it a try. Not exactly what I was going for, but close enough without ordering actual orange colorant, which is pricey.
SAFETY NOTE:
The balls should never be put into a mouth without a method of pulling them out in place (like a strap) and of course keep away from children and intoxicated people. Dogs are usually smart enough not to swallow them, but care should be taken with them also. This batch of balls specifically should be careful if too many teeth bites are showing or if you have someone that frequently bites down hard on the ball gag.
CUSTOMIZATION:
There is none for this listing, although You can order with a replacement strap and if you let me know ahead of time, I can do a custom strap for you.
SHIPPING NOTE:
Not responsible for customs and fees once it leaves the USA.
Excess shipping is most often to occur with smallest sizes and multiple item orders.
They are JUST THE BALLS, NO straps.
They are what I would call "Pumpkin Orange" in color. They are a mix of yellow and red colorants, because the yellow has some white in it, they have a very slight white shade from what would be straight on Orange.
This is a manual hand mix, so there will be slight variations between batches.
I DO NOT plan to ever get orange colored leather, don't even know if it is available.
I have decided based on this last round that I will keep the sizes 1.0" to 2.5" in stock, sort of, as in I will only be maintaining a small amount of these in stock at any one time, so may run out from time to time of particular sizes.
I do not have room for storing a full stock set of these. I may in the next batch make one or two of the very large balls, but likely will be summer 2025 before I do that. Possibly sooner though.
They are being sold for the folks that want a high quality ball that are a little unique.
The balls are made in Newport News, Virginia, USA.
They are only available in the sizes created.
They have been calipered and rounded off to my usual sizes and are thus give or take 1/16th of an inch variation from that listed.
STRAPS:
The following two links go to SOME of my replacement Straps, be sure to get the correct width of strap. Request in notes if unsure and you get the strap at the same time.
Other leather strap colors are available as shown in images. Feel free to send me a message if interested in other colors.
The links will be changed to a Spicerack link later, but should still work on Etsy.
Regular Black Leather:
https://www.etsy.com/listing/579102658/replacement-black-leather-straps-for
Black PVC Rubber Straps:
https://www.etsy.com/listing/553566193/pvc-rubber-replacement-strap-for-ball
Let me know in the notes if you want the ball placed on the strap before shipping, otherwise they will be shipped in separate packaging. (until the Strap listings are moved here, they will be shipped separately.
Specifications:
- USP Class VI quality level of silicone material and most color additives (although they do not come sterilized, they can be medically sterilized if needed or desired).
- I am not 100% sure that mixing the colors has affected their properties, however both colors used pass individually.
- Target durometer in this case is 43. The durometer should be plus or minus 5 due to molding variations. A small number of the smaller balls are a target of 34.
- The strap holes are molded in and can not be changed without modifications to the mold.
- Rectangular Strap holes.
-- Balls that are 1.0, 1.125", 1.25" and 1.375" in diameter have a 1/2" by 1/8" strap hole.
-- balls that are 1.5" to 2.5" in diameter have a 3/4 inch by 1/8 inch strap hole.
-- Balls at or larger than 2.625" in diameter have a 1" by 1/8" strap hole.
Note: the holes are a hint bigger than this to accommodate a strap exactly this width and thickness.
TRIVIA NOTES:
I had several customer requesting Orange and so I decided to give it a try. Not exactly what I was going for, but close enough without ordering actual orange colorant, which is pricey.
SAFETY NOTE:
The balls should never be put into a mouth without a method of pulling them out in place (like a strap) and of course keep away from children and intoxicated people. Dogs are usually smart enough not to swallow them, but care should be taken with them also. This batch of balls specifically should be careful if too many teeth bites are showing or if you have someone that frequently bites down hard on the ball gag.
CUSTOMIZATION:
There is none for this listing, although You can order with a replacement strap and if you let me know ahead of time, I can do a custom strap for you.
SHIPPING NOTE:
Not responsible for customs and fees once it leaves the USA.
Excess shipping is most often to occur with smallest sizes and multiple item orders.
No returns accepted for Custom or "AS IS" made items, We may repair or will replace an item if there is a manufacturing defect on a custom made item. "AS IS" items presume some defect so we will not replace those.
Balls and ball gags may ONLY be returned if the inner bag's seal is intact
All other non-custom items may be returned if unopened for refund except shipping.
If there is a problem with the order, please contact the shop email, we will require a picture of the problem, our policy is to replace when we can, if it is our fault at cost. We allow replacements, but customer must pay for shipping both ways and any difference in price if we originally shipped the correct item AND we can accept it back (such as Ball gags still sealed in their bags).
4.9
Based on another platform Shop Rating
To leave a review, you must purchase this product.
Meet Your Match Maker
About Pleasure Paradox
Pleasure Paradox (AKA TPP Enterprises, LLC) is a manufacturer of adult goods, including Silicone Ball Gags, leather cuffs and collars (including our well known Easy Wear Cuffs, designed for suspension), Stainless Steel Spreader Bars, and miscellaneous other related items. We also sell some crafting items such as padlocks, buckles, straps, and of course our silicone balls for ball gags made (molded) here in Newport News, Virginia, USA.
Please sign in so that we can notify you about a reply
(you look great today by the way)
