This listing is for the 4x pack of Hasp Locks (AKA Staple Plates) I use and am making available for resale.
The 4x pack is enough to cover a set of cuffs, with one for buckle and one for the attachment point. Or two sets (ankle and wrist) if just used for buckles.
I also have a listing for singles of these available.
This style of buckle requires a padlock of some kind, it can however handle larger padlocks (up to a point) and as long as the leather is not too thick. From My experience 6-7 oz leather with a 3-4 oz suede backing works well with room to spare for all the padlocks we sell. 8-9 oz leather with a backing will work, but barely.
Recommend the strap/cuff/collar width be at least 1 1/4" wide for this item.
You will need a 5/8th inch oval punch (for the Hasp) and then am 1/8" round punch for the rivet holes.
I use a s
...
This listing is for the 4x pack of Hasp Locks (AKA Staple Plates) I use and am making available for resale.
The 4x pack is enough to cover a set of cuffs, with one for buckle and one for the attachment point. Or two sets (ankle and wrist) if just used for buckles.
I also have a listing for singles of these available.
This style of buckle requires a padlock of some kind, it can however handle larger padlocks (up to a point) and as long as the leather is not too thick. From My experience 6-7 oz leather with a 3-4 oz suede backing works well with room to spare for all the padlocks we sell. 8-9 oz leather with a backing will work, but barely.
Recommend the strap/cuff/collar width be at least 1 1/4" wide for this item.
You will need a 5/8th inch oval punch (for the Hasp) and then am 1/8" round punch for the rivet holes.
I use a small marker punch to mark the rivet holes with the Plate in place on the leather and then center the 5/8th oval punch after I have punched out the rivet holes. That is when Not using my new self -center punch for the rivet holes.
And then the same 5/8th punch can be used for the tongue holes.
These are only available in Nickel Finish. There was a time when I could also get in Brass, but my distributor stopped carrying both of them for a time, eventually though bringing the nickel one back.
No returns accepted for Custom or "AS IS" made items, We may repair or will replace an item if there is a manufacturing defect on a custom made item. "AS IS" items presume some defect so we will not replace those.
Balls and ball gags may ONLY be returned if the inner bag's seal is intact
All other non-custom items may be returned if unopened for refund except shipping.
If there is a problem with the order, please contact the shop email, we will require a picture of the problem, our policy is to replace when we can, if it is our fault at cost. We allow replacements, but customer must pay for shipping both ways and any difference in price if we originally shipped the correct item AND we can accept it back (such as Ball gags still sealed in their bags).
To leave a review, you must purchase this product.
Meet Your Match Maker
About Pleasure Paradox
(you look great today by the way)
